Motip Instant Puncture Repair Emergency Tyre Weld Inflate Leak Sealer Car

User-friendly, rubber based spray to execute emergency repairs on tubeless tyres. MoTip Car Care Tyre Repair can be used without removing the tyre.

500ml

No jacks or tools required

Suitable for cars, vans and trailers

TPMS Safe

A quick and simple "Get You Home Repair". No jack, tools or wheel change required. Does not damage tyre. Unique safety value automatically seals and re-inflates in one twist, keeping you away from dangerous traffic. Can also be used for vanes, caravans and trailers. Suitable for tubeless tyres ONLY.

How do I use tyreweld?

1. If possible remove the object causing the puncture.

2. For the best results try and position the puncture at the base of the wheel and deflate completely.

3. Shake the can well, remove the red safety seal and screw the connector tightly on the tyre value. (In cold weather warm the tyreweld can in your hands or over the car heater vent).

4. Place tyreweld upright and turn the red knob to "ON".

5. Allow tyreweld to empty completely then turn the red knob to "OFF".

6. Drive immediately for 6-12 miles at a maximum speed of 30 MPH to fully seal the puncture.

7. Check and adjust the tyre pressure as required.

IMPORTANT

DO NOT repair tyres that have come off the rim, that are ripped, have punctures larger than 5 mm or have punctured walls.

Store securely in car boot.