PACINI Pro TIG 200 Pulse Welder
SKU
PCTIG200
Categories: TIG Welders, Welding
- DC TIG welding – Direct current (DC). Welding of almost all materials such as steel, stainless steel, copper, brass and many more.
- 2 in 1 combined device – TIG and MMA welding up to 200A.
- Gas post flow (TIG) – protects the tungsten electrode against excessive wear and protects the weld from oxidation. The parameters can be set individually and separately. They indicate how long after ignition gas should flow.
- IGBT Technology – latest transistor technology enables highest power and a duty cycle of 60% at full power. No transformer, no MOSFET, modern IGBT.
- Lightweight & compact design – only 7,6 kg and dimensions of 390 x 170 x 275 mm. Innovative IGBT transistors save space and weight compared to the old MOSFET technology. No heavy carrying!
- High frequency ignition– allows non-contact ignition and ensures a much better welding result.
- Hotstart – Automatic voltage increase upon the start for better ignition results.
- Anti-stick - Automatic shutdown of the welding current in case of sticking of the electrode which allows an easy removal. It also prevents annealing of the electrode.
- Highest efficiency & performance – Single phase current (230 V) supplies the device and allows an output power of real 200 amperes.
- Smart cooling & overheating protection – modern technology, built-in overheat protection and high-performance cooling allow you to get maximum performance.
- TIG (Tungsten-Inert-Gas) – Inert gas welding with inert / inactive gases such as Argon 4.6 (99.996%). An arc is created in an argon bell between the tungsten electrode and the workpiece. This melts the material and any filler material that is supplied. A weld seam is created.
- MMA / Stick electrode welding – an universal welding process. An arc causes the electrode to melt, forming the weld. No protective gas is needed.
- Tig Lead (WP-17) = 4 Metre
- Arc Lead = 1.8 Metre
- Earth Lead = 3 Metres
- 2.0 , 2.4 3.2m Tungsten Adaptors
- Note:
- The unit is not intended for use in residential areas where power is supplied by a public low-voltage power supply system. It may be difficult to ensure electromagnetic compatibility in these areas due to both conducted and radiated interference.
Output current | 30-200 A |
Duty Cycle | 80 % at 200 A / 100 % at 155 A |
Protection type | IP21S |
Insulation class | F |
Power supply | 230 V AC (+-15%) / 1 ~ (single phase) |
Frequency | 50/60 Hz |
Maximal power input | 26,8 A |
Actual power input | 20,8 A |
Weight | 7,6 kg |
Dimensions L x W x H (mm) | 390 x 170 x 275 |
Standards | IEC 60974-1; EN 60974-10 (Class A) |
SKU | PCTIG200 |
---|---|
GTIN | 05391541110224 |
Product UPC/EAN | TIG-200 |
4 customer reviews
Log In