Fuel System Tools

Product Features: * Made from top quality material SKD11 which makes clean work easy;* Comes with 5 various cutters which fit most diesel car and light commercials;* Also comes with a chrome vanadium T bar wrench;* The tool holding bar centralises...

  Engine Oil Pressure Test Kit  Helps to diagnose worn oil pumps, faulty oil pressure switches and pressure warning indicators.  Shock protected dual scale gauge for quick and accurate oil pressure checks.  1M long flexible...

You are purchasing a brand new, top of the range, heavy duty, diesel injector flow test kit with quick release adaptors. This universal kit is designed to measure rapidly and effectively the amount of fuel that every injector returns to the deposit...

Petrol Engine Compression Test Kit 3pc • Fitted with Ø65mm gauge having two scales (psi and kPa), reading from 0-300psi and 0-2000kPa.• Includes quick coupling 150mm rigid stem with cone-type adaptor and 320mm flexible adaptor with 14...

  Copper Injector Seal Rings   150pc Fuel Injector Copper Seal Rings For sealing injector ports on common rail diesel injection systems ( CDI ). outside diameter | inside diameter | depth 13.8 | 7.3 | 1.4 mm 14.6 | 7.5...

Compression Testing Kit for Diesel Engines For Direct And Indirect Engines Dual Scale Guage Glow Plug Adaptors M10x1.0 M10x1.25 M12x1.25 M14x1.25 Dummy Injectors M20x1.5 M24x2.0 Stanadyne Dummy Replacement Seal And Washer Set 90 Degree Elbow Clamp...

Engine Pressure loss test set gives you valuable information about the engine’s compression. Pressurized air is supplied to each cylinder, and the rate of leakage is measured in percent loss from 0% to 100%. Cylinder leakage gauge makes it...

GLOW PLUG REMOVAL SET *** DESIGNED FOR REMOVING DAMAGED OR DIFFICULT GLOW PLUGS FROM THE CYLINDER HEAD.FOR REMOVING BROKEN OR DAMAGED GLOW PLUGS.REMOVES 8MM AND 10MM GLOW PLUGS.MANUFACTURED FROM SELECTED STEEL.ESSENTIAL TOOL.PACKED IN A BLOW CASE.  

14pcs Injector Extractor W/Slide Hammer Car Tool Kits (MK0258): Slide hammer: 3.9KGSAdaptor: M14 x 1.5 for DELPHIAdaptor: M17 x 1 for BoschAdaptor: M20 x 1 for DENSOAdaptor: M24 x 1 for SIEMENSAdaptor: M27 x 1 for SIEMENSAdaptor: M27 x 1.0 for...

Neilsen 40Piece Injector Extractor with Common Rail Adaptor - NEW 22kg box set This professional tool is a specialised sliding hammer for removal of stuck and seized common rail injectors without dismantling the cylinder head for all injection nozzle...

Engine Compression Test Kit   A comprehensive kit for testing the compression on both petrol and diesel vehicles. Features 600psi gauge with large rubber bumper Straight and right angled quick connect fittings Spark / Glow Plug and...

Fuel Pressure Test Kit Used to test fuel pressure and to perform basic electric tests. Multi-Meter / Leads and Clips. Test gauge / boot and hose M8 x1.0 / M12 x 1.25 / M12 x 1.5 banjo bolts 90 degree angle adapter. 1/4 and 5/16...

CT0590 Diesel Injector Nozzle Tester Injector Nozzle Tester for Diesel Engines  Used to adjust and calibrate the injection nozzle opening pressure and to carry out leakage / spray pattern and chatter characteristic tests. For nozzle size -...

For Direct And Indirect Petrol Engines Dual Scale Guage Thread Chasers M10 M12 M14 M18 Extensions M10 M12 M14 M18

Vacuum and Fuel Pump Tester Vacuum and Fuel Pump Pressure Tester. Large 80mm diameter colour coded easy read gauge with protective rubber bumper and hanging hook. Test Pressure up to 10psi .Rubber hose and 14mm / l 7mm manifold adapter...

Spark Plug Thread Repair Kit 25pc Spark Plug Thread Repair Kit Comprehensive and time saving kit for spark plug thread repair. Especially suitable for the repair of deep-seated plug configurations. Incorporates taper and plug taps...

CT4060 Diesel Injector Seat Cleaning Set For efficient cleaning of injector ports and seating before changing or when reconditioning diesel injectors. Helps to avoid blow-back due to poorly seated injectors. Suitable for most vehicles...

Suitable for Mercedes-Benz CDI enginesthe series OM611, OM612, OM613- 1x impact extractor (1,85 kg, 470 mm long)- 1x injector claw- 1x adapter with internal thread for direct mountingon the injector- total length with adaptor 500 mm, with claw 570 mm

Specially designed for the removal of stubborn diesel injectors fitted on Mercedes CDI engines.Features injector cap removal socket, security hex key for removing the inner part of the injector and a puller to remove the injector without damaging the cam...

CT3422 Fuel Injector Tester - 12V   Works on injectors individually to diagnose fuel delivery problems on petrol vehicles with electronic fuel injection. Works with engine off and pulse timer maybe used with fuel pressure gauge. Comes...