12v Oil Pump
- 12v Oil Pump
- 1.00 KGS
- Calculated at Checkout
Oil Pump - 12V
12 Volt Oil Pump / Extractor.
Suitable for diesel heating or motor oil.
Connect to 12 Volt battery using crocodile clips.
Will remove oil using access through the dipstick port.
Complete with all necessary accessories.
NOT suitable for flammable liquids.
Ideal equipment for quick and clean oil-changes.
Input Voltage : 12V DC
Rated current : 5A approx
Sound pressure level : 70dB/A
Maximum flow rate Diesel or Heating Oil : 5 L/min
Maximum flow rate Motor oil / 40-60 C : 1 L/min
Maximum Suction lift height : 70 cm
Excellent service from IGE, best price and next day delivery.
Gets the job done, bit messier than you think as the tubes get covered in oil and hold oil when you're done so think where you're going to store it.
Pretty small little pump, but fairly quick to drain when the oil is warm, 10min or so for 4-5L, lot quicker than jacking up and draining via the sump.
Main thing to watch is that if you put in the full recommended capacity after draining, you will overshoot the max mark, so doesn't seem to fully drain, knock about .5L off the recommended fill, measure, take it for spin, measure again and see if you need a top-up.